1. What’s the land dimensions required for Leisuwash installation ? ( Length×width×height )

( minimum sizes for wash bay, devices room not included )

Leisuwash 360: 7600×3850×3350mm

Leisuwash SG: 8900×4000×3300mm

Leisuwash 360 mini: 7100×3300×3100mm

Leisuwash S90: 7000×3300×3100mm

2. What’s average time for each car washing ?

It’s depends on how many the wash steps, complete wash steps with under chassis wash, presoak, high pressure wash, shampoo, wax, air dry will takes 6~8 mins, the time could be shorten if remove some of steps.

3. How about the air drying result ?

Uses design of air fluid mechanics principle to achieve long-distance high-pressure air cylinder, can reach 90% drying result, the stability with safety are much more better than the profiling air drying in brush wash machine.

4. What’s the cost for washing one car ?

For example in our city Hangzhou, water with electricity cost for one car is about 2RMB, chemicals cost about 1RMB, total 3RMB equals USD0.5

Electricity consumption for one complete wash is about 1KWH.

Water consumption is about 50L per circle ( one car wash takes 2~3 circles )

Chemicals consumption 20~50ml each kind per car. ( adjustable )

5. What’s the difference between Leisuwash 360, SG, 360 mini, S90 ?

The most important updates for Leisuwash SG is the appearance of a horizontal washing arm. The distance from the sprayer to the car body has become evenly minimal. Water is alternately supplied from a horizontal hose or from a vertical one. This guarantees a much better washing the entire surface of the car.

Leisuwash SG and Leisuwash 360 are industry level units with 3 years warranty.

Leisuwash 360 mini and S90 are entry level units with 1 year warranty.

6. What size vehicles the Leisuwash can apply for ? ( Length×width×height )

Leisuwash 360 maximum car wash size: 5900×2900×2000mm

Leisuwash SG maximum car wash size: 5900×2950×2250mm

Leisuwash 360 mini maximum car wash size: 5600×2600×2000mm

Leisuwash S90 maximum car wash size: 5600×2600×2000mm

7. What’s power supply required for running Leisuwash ?

Leisuwash car wash machines require 3 phase industry power supply, in China the standard is 380V/50Hz, if customer require different voltage or frequency, we have to customize motors from Siemens company, and change accordingly fans, low-voltage electrical cables, control units, etc. But must be 3 phase, not 2 phase.

8. How to make installation and after sale service for Leisuwash?

* If there’s an exclusive distributor available in your region, you need to buy from distributor and distributor will support your installation, training and after sale service.

* If a distributor can’t be found in your region, we can dispatch technician to support your installation and training, but the traveling expense should be on customer’s account, this will include visa cost, air tickets cost, hotel with restaurant cost, and customer need to pay for technician salary USD150/day. One machine installation takes about 7 days. ( we provide one technician and customer provide two men to assist )

* Customer is possible to install the machine by themselves, we will have detailed installation and maintenance manual send together with machine.

9. How to become a distributor ?

Leisuwash marketing strategy is establish distributors at each country. ( some big countries will established by regions )

* We don’t have special condition for a conventional distributor without exclusive right.

* If you want to apply for exclusive dealership in your country or region, the first step you need to purchase a demo machine to show customers there, and then we need to make an agreement with a yearly MOQ.

10. What need to be prepared before machine installation ?

* 3 phase industry power supply, 25Kw.

* Water supply, with a water tank. ( 2000 liters )

* Air compressor with air volume more than 0.67m³/min, could provide stable air pressure more than 0.8Mpa.

* Floor cement thickness need to be more than 20cm, if not enough then need to make six concrete columns for mounting support frames, floor horizontal error less than 3cm.

* Scaffold 2 pcs.

* Electric Hammer 1 pc, configurated 10, 14, 16 drill each one piece.

* Electric Welder 1 pc.

* Polisher 1 pc.

* Infrared Level 1 pc.

* Rough twine 10 meters.

* Hand Electric Drill 1 pc.

Leisuwash installation required tools

11. What’s the warranty of Leisuwash ?

We offer 3 years extended warranty for complete machine, all spare parts included, within warranty period, if any parts break down, we will compensate new parts at free charge, but warranty doesn’t cover courier expense. Normally we will ask customers keep some spare parts in stock for machine maintenance, and the compensation spare parts will be sent together with next sea shipment. If customer require to send by courier way, the courier cost should on customer’s account.

Meanwhile, warranty is not valid in any of below situation:

* Human damage or operate the machine not follow instruction or under abnormal circumstance.

* Damage due to force majeure, such as wars, floods, earthquakes, lightning, abnormal voltage.

12. What’s shipping volume of Leisuwash ?

* Leisuwash 360: Polywood case for main machine: 3660×1410×1255mm, Polywood case for water pump system: 1350×900×600mm, Polywood case for mixing system: 920×545×1610mm, Rails: 2pcs ( 7.5 meters ), Frames: 13pcs, total shipping weight about 2600kgs, total shipping volume about 12 CBM.

* Leisuwash SG: Polywood case for main machine: 3670×1900×1400mm, Polywood case for water pump system: 1340×900×600mm, Polywood case for mixing system: 900×550×1610mm, Rails: 2pcs ( 8790* 480*100mm, 520kgs ), Frames: 12pcs, total shipping weight about 3500kgs, total shipping volume about 14 CBM.

* Leisuwash 360 mini: Polywood case for main machine: 3170×1400×1260mm, Polywood case for water pump system: 1340×900×600mm, Polywood case for mixing system: 900×550×1610mm, Rails: 2pcs ( 7000*100*100mm, 205kgs ), Frames: 13pcs, total shipping weight about 2300kgs, total shipping volume about 10 CBM.

* Leisuwash S90: Polywood case for main machine: 3170×1260×1340mm, Polywood case for water pump system: 1340×800×600mm, Polywood case for mixing system: 900×550×1610mm, Rails: 2pcs ( 6.0 meters ), Frames: 6pcs, total shipping weight about 1500kgs, total shipping volume about 8 CBM.

Because of the 7.5/8.8 meters rails are longer than 20’Ft container, so our machine need to be shipped by 40’Ft container. Leisuwash S90 could be loaded into 20’ft container.

13. How to make transportation and how much of it ?

We will deliver containers to destination port by boat, the shipping terms can be EXW, FOB or CIF, the average shipping cost for one machine around USD500~1000 depends on how far the destination port from us. ( dispatching port Ningbo or Shanghai )

14. What is leading time of Leisuwash ?

If customer require same as China standard three phase industry voltage 380V/50Hz, we can provide fast delivery within two weeks, if different with China standard, the delivery schedule will be 30 days.

15. What’s the harmonization system code of the car wash system ?

HS code: 8424899990